What cleaning agent is needed?

1. Warm water + neutral detergent: Wet a soft cloth or sponge with warm water (not hot), add a few drops of ordinary detergent, and gently wipe the Sticky Roller surface to remove attached dust and residual adhesive.

2. Alcohol or isopropyl alcohol: For stubborn adhesive stains, spray with 90% isopropyl alcohol, let it sit briefly, then wipe with a clean cloth. This will dissolve residual adhesive without corroding the polyethylene base material of the roller.

3. Avoid strong acids and alkalis: Strong acids, strong alkalis, or solvents (such as acetone) will damage the structure of the adhesive layer, causing a decrease in stickiness during subsequent use. Be sure to use a mild cleaning agent.

4. Air dry after cleaning: Absorb surface moisture with a clean towel and place in a ventilated area to air dry naturally. Avoid using hot air to dry, which can cause the adhesive layer to harden.

How to quickly restore the stickiness of Sticky Roller after use?

1. Simply peel off the used layer: The Sticky Roller features a multi-layer peelable polyethylene film design. After use, simply peel off the dusty layer along the pre-set tear line to expose the new adhesive layer for continued use.

2. Keep it sealed: When not in use, place the Sticky Roller in its original packaging or a sealed bag to prevent airborne dust from adhering to the surface prematurely, thus maintaining longer-lasting stickiness.

3. Replace the roller regularly: Depending on usage frequency (e.g., cleaning 2-3 times daily), it is recommended to replace the entire roll every 30-50 uses to prevent the adhesive layer from aging due to repeated use.

4. Use with the extension handle: Using the extension handle allows for more even pressure distribution on the roller, reducing single-point wear and thus extending the effective lifespan of each layer—this is one of the practical improvements incorporated by Suzhou Jujie Electron Co., Ltd. in its product development.